187,700 views 280 on YTPak
414 26

Published on 17 Dec 2012 | over 4 years ago

Download the circuit diagram here: myclassbook.wordpress.com/2013/05/24/how-to-make-dtmf-decoder-mini-project/
Also visit : adf.ly/PWeez
Dual-tone multi-frequency signaling (DTMF) is used for telecommunication signaling over analog telephone lines in the voice-frequency band between telephone handsets and other communications devices and the switching center. The version of DTMF that is used in push-button telephones for tone dialing is known as Touch-Tone.
Other multi-frequency systems are used for internal signaling within the telephone network.
Binary data transfer
DTMF keypad frequencies (with sound clips)
The tone frequencies, as defined by the Precise Tone Plan, are selected such that harmonics and intermodulation products will not cause an unreliable signal. No frequency is a multiple of another, the difference between any two frequencies does not equal any of the frequencies, and the sum of any two frequencies does not equal any of the frequencies. The frequencies were initially designed with a ratio of 21/19, which is slightly less than a whole tone. The frequencies may not vary more than ±1.8% from their nominal frequency, or the switching center will ignore the signal. The high frequencies may be the same volume as -- or louder than -- the low frequencies when sent across the line. The loudness difference between the high and low frequencies can be as large as 3 decibels (dB) and is referred to as "twist." The duration of the tone should be at least 70 ms, although in some countries and applications DTMF receivers must be able to reliably detect DTMF tones as short as 45ms.

Loading related videos...