114,636 views 162 on YTPak
145 46

Published on 11 Jun 2014 | over 2 years ago

Tutorial - HOw to configure routing using static IP address - Cisco Packet Tracer

Transcription of commands

Router 1 - R1 configuration commands

1. no
2. en
3. conf t
4. int fa0/0
5. ip address 192.168.1.1 255.255.255.0
6. no shut
7. int s0/0/0
8. clock rate 64000
9. ip address 192.168.2.1 255.255.255.252
10. no shut
11. exit
12. ip route 192.168.1.0 255.255.255.0 s0/0/0

Router 2 - R2
1. no
2. en
3. conf t
4. int fa0/0
5. ip address 192.168.2.5 255.255.255.252
6. no shut
7. ip route 192.168.1.0 255.255.255.0 s0/0/0

Generic PC 1 settings
IP 192.168.1.2
Subnet mask 255.255.255.0
Gateway 192.168.1.1

Generic PC 2 - same like PC1 just IP address is 192.168.1.3

Server settings
IP 192.168.2.6
Subnet mask 255.255.255.252
Gateway 192.168.2.5

After configuration you have to ping from PC1 or PC2 to Server using command:
ping 192.168.2.6

Loading related videos...