415,838 views 120 on YTPak
1,702 130

Published on 12 Jul 2014 | over 2 years ago

This is what you can build from an ordinary foam pool noodle! I call this the "Demon-Claw" 3D plane! My own original design. ... it's so easy to make you don't even need plans just watch my build video coming up in a day or two that will also have the maiden flight !

My Demon-Claw is so easy to build ANYONE can build it!


Here are the parts for this Pool Noodle plane:

2-30 to 40 inch carbon fiber Rods

1 Pool Noodle

1 large sheet of Depron or equvelant foam

1 30-40AMP ESC speed controller

1 750KV or up to a 2000KV brushless outrunner motor use a motor around 1 inch in diameter . . .if it too large it will make your plane too heavy!

4 11-20 gram mini servos

1 6, 8 or 10 inch prop

2 1 or 2 inch diameter foam wheels

Plastic hinges and speed connectors

I use a Futaba 7CAP 2.4Mhz Radio and FASST RX for this plane.

Loading related videos...